rev b pol06 - 05t series 6a output current rating dc/dc open frame converter single output 1/27/2017 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 1 of 5 s md package type sip vertical package type sip horizontal package type size: 0.80in x 0.45in x 0.21in size: 0.90in x 0.40in x 0.20in size: 0.90in x 0.40in x 0.36in options features ? smd or sip packages ? vertical or horizontal mounting for sip p ackages ? remote control positive or negative logic ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? telecom/datacom ? industry control system ? distributed power architectures ? semiconductor equipment ? microprocessor power applications the pol0 6 - 05t series of dc dc open frame converters delivers up to 6a of output current in a small size and low profile package. this series consists of output voltages ranging from 0.75 to 3.3vdc and an input voltage range of 2.4 - 5.5vdc. no minimum load is required for this series, and it has a fixed switching frequency and high efficiency of 94%. pol 06 - 05t offers several different options such as surface mount or through hole package type, vertical or horizontal mounting on the sip package type, and positive or negative logic. this series has over load, over temperature, and short circuit protection, as well as ul60950 - 1, en60950 - 1, and iec60950 - 1 safety approvals. it is rohs ii and reach compliant. please call factory for order details. model selection table model number input voltage range output voltage output current @full load efficiency package on/off logic pols06 - 05t 5vdc (2.4~5.5vdc) 0.75~3.3vdc 6a 94% smd negative pols06 - 05t - p positive polt06 - 05t 5vdc (2.4~5.5vdc) 0.75~3.3vdc 6a 94% sip vertical negative polt06 - 05t - p positive polt06 - 05ta sip horizontal negative polt60 - 05ta - p positive
rev b pol06 - 05t series 6a output current rating dc/dc open frame converter single output 1/27/2017 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 2 of 5 specifications all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwise noted. we reserve the right to change specifications based on technological advances. specification test conditions min typ ma x unit input specifications operating input voltage range vout(set) < vin - 0.5vdc 2.4 5 5.5 vdc maximum input current vin=vin(min.) vout(set)=3.3vdc, io=io(max.) 6 a shutdown voltage 2.0 vdc start - up voltage 2.2 vdc input reflected ripple curr ent 5~20mhz, 1 h source impedance 35 map - p input filter (1) capacitor type input no load current vo, set=0.75vdc 20 ma vo, set=3.3vdc 45 output specifications output voltage 0.75 3.3 vdc voltage accuracy % of vout - 2.0 +2.0 % line regulat ion vin=vout(set)+0.5vdc to vin(max.) at full load; % of vout - 0.3 +0.3 % load regulation no load to full load; % of vout - 0.4 +0.4 % voltage adjustability (2) 0.7525 3.63 vdc output current 6 a minimum load 0 % maximum capacit or load (3 ) e sr
rev b pol06 - 05t series 6a output current rating dc/dc open frame converter single output 1/27/2017 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 3 of 5 specifications all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwise noted. we reserve the right to change specifications based on technological advances. specification test conditions mi n typ max unit general specifications efficiency vin(nom) 3.3vdc@full load 94 % switching frequency 270 300 330 khz physical specifications weight 0.1oz (2.8g) dimensions (l x w x h) smd package 0.80in x 0.45in x 0.21in (20.3mm x 11.4mm x 5.4mm) sip vertical package 0.90in x 0.40in x 0.20in (22.9mm x 10.2mm x 5.0mm) sip horizontal package 0.90in x 0.40in x 0.36in (22.9mm x 10.2mm x 9.1mm) safety & emc characteristics safety approvals ul60950 - 1 en60950 - 1 iec60950 - 1 notes (1) it?s necessary to equip the external input capacitors at the input of the module. the capacitors should connect as close as possible to the input terminals to ensure module stability. the external ci n is 2pcs of 150 f low - esr polymer capacitors // 2pcs of 47 f ceramic c apacitors at least. (2) output voltage programmable from 0.75v to 3.3v by connecting a single resistor (shown as trim table) between the trim and gnd pins of the module. to calculate the value of the resistor rtrim for a particular output voltage vout, use the following equation: (3) test by minimum input and constant resistive load. (4) with a 1 f mlcc & a 10 f t/c (5) with 2pcs of 150 f polymer capacitors . (6) remote on/off referred to ? vin pin positive logic: on/off is open collector/drain logic input negative logic: on/o ff pin is open collector/drain logic input with external pull - up resistor (7) case 1: on/off input is set to logic low (module on) and then input power is applied (delay from instant at which vin=vin(min ) until vout=10% of vout(set)) (8) case 2: input power is app lied for at least one second and then on the on/off input is set to logic low (delay from instant at which von/off=0.3vdc unit vout=10% of vout(set)) caution: this power module is not internally fused. an input line fuse must be always be used. character istic curves pols06 - 05t, vout=3.3v derating curve pols06 - 05t, vout=3.3v efficiency vs. input voltage pols06 - 05t, vout=3.3v efficiency vs. output load
rev b pol06 - 05t series 6a output current rating dc/dc open frame converter single output 1/27/2017 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 4 of 5 mechanical drawing s smd package pin con nection pin define 1 ctrl 2 +vout 3 trim 4 gnd 5 +vin sip vertical package pin connection pin define 1 +vout 2 trim 3 gnd 4 +vin 5 ctrl sip horizontal package pin define 1 +vout 2 trim 3 gnd 4 +vin 5 ctrl 1. all dimensions in inch (mm) 2. tolerance: x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 3. pin pitch tolerance 0.01 (0.25) 4. pin dimension tolerance 0.004(0.1)
rev b pol06 - 05t series 6a output current rating dc/dc open frame converter single output 1/27/2017 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 5 of 5 model number setup polt 06 - 05 ta p series name output curre nt input voltage package remote control option pols: smd type 06: 6a 05: 2.4~5.5vdc t: no assembly none: negative logic polt: sip type t: vertical mounting sip p: positive logic ta horizontal mounting sip company information wall industries, inc. has created custom and modified units for over 50 years. our in - house research and development engineers will provide a solution that exceeds your performance requirements on - time and o n budget. our iso9001 - 2008 certification is just one example of our commitment to producing a high quality, well - documented product for our customers. our past projects demonstrate our commitment to you, our customer. wall industries, inc. has a reputatio n for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. we will continue to provide ongoing support for your project above and beyond the design and production phases. give us a call today to discuss your future projects. contact wall industries for further information: phone: ? (603)778- 2300 toll free: ? (888)597 - 9255 fax: ? (603)778- 9797 e - mail: sales@wallindustries.com web: www.wallindustries.com address: 37 industrial drive exeter, nh 03833
|
